Version: 2.5.1.5 Date : 2009/09/11 Purpose: Maintainace release Change features: 1. Change code to aviod stack overflow which cause system reboot. 2. Disable DHCP filter while all dhcp ports are not enabled. ***************************************************************************** Version: 2.5.1.4 Date : 2009/6/25 Purpose: Maintainace release Change features: 1. Add 1ms delay to make TX disable. Comment: The SMC SFP module, during power cycle test, will not link up properly. ***************************************************************************** Version: 2.5.1.3 Date : 2009/6/2 Purpose: Maintainace release Change features: 1. Add managed VLAN ID setup on LAN IP setup page. ***************************************************************************** Version: 2.5.1.2 Date : 2009/3/23 Purpose: Maintainace release Improvement 1. Improvement loopback on port 1 and port 2 to restore default during booting up if port 1 and port 2 belong different VLAN and PVID. ***************************************************************************** Version: 2.5.1.1 Date : 2009/2/18 Purpose: Maintainace release Fixed bugs: 1. Fix restore factory default when loop port 1 VLAN and port 2 VLAN is difference after system power cycle. Comment: if port 1 and port 2 pvid is not the same as 1. This restore function will not be activated still. 2. Fix SNMP trap destination setup failure. 3. Fixed bug: fix snooped frame corrupted if frame length is more than 60. 4. Fixed bug: Transmit subroutine of "h2_uip_fwd_snooped_frame" and "h2_uip_tx_specific_query_frame" do wrong packet type decision. 5. Fix: Discard IGMP packets which has checksum error on IP layer. 6. Fix: When the last IGMP member leave the group, the dynamic router port of this group will be removed. 7. Fixed IGMP Snooping will overwrite packet buffer of uip while it transmits specific query. 8. Fixed IGMP Snooping will make mulitcast MAC table incosistance during it handles join-leave process. 9. Fix DHCP filter scan option error due to padding offset length is 1. Clarified EPRS: 1. ES4324AL-FLF-17-00123 PortSecurity:DUT can not send trap when the mac amount is filter by port security. Comment: Design as spec. I can read this trap. 2. ES4324AL-FLF-17-00128 LACP:DUT cano not create dynamic trunk when connect links is auto-nego and 100F. Comment: Port speeds must be the same during configration LACP. 3. ES4324AL-FLF-17-00127 LACP:DUT will lost connection when disconnect dynamic trunk link quickly. Comment: How fast you do this test? I’ve plug and unplug many times. I still make lacp successful. 4. ES4324AL-FLF-17-00114 IGMPSnooping:The description of IGMP page is wrong. Commnet: Synchronize all keyword "IGMP Snooping" to "IGMP SNOOP" ***************************************************************************** Version: 2.5.1.0 Date : 2009/01/07 Purpose: Maintainace release Fixed bugs: 1. ES4324AL-FLF-17-00124 VLAN:VLAN 4094 can be created, but web hlep only show the range 1-4093. 2. ES4324AL-FLF-17-00125 SmartWeb:DUT show a error message when change login password. 3. ES4324AL-FLF-17-00119 IPConfiguration:Managment access filtering can not work when only configure the end ip address. 4. ES4324AL-FLF-17-00121 CoS:After configure a invalid vaule of DSCP, DUT shows a error page. 5. ES4324AL-FLF-17-00118 802.1x:The RADIUS secret key should be mask like "***". 6. ES4324AL-FLF-17-00117 802.1x:DUT did not show any alert message when configure the period to a invalid value. 7. ES4324AL-FLF-17-00115 RSTP:DUT can not show the proper rstp information when port is a trunk member. 8. ES4324AL-FLF-17-00113 VLAN:DUT will show a error page when add a vlan id which is exist. 9. ES4324AL-FLF-17-00112 VLAN:DUT will show a error page when add a invalid vlan id. Clarified EPRS: 1. ES4324AL-FLF-17-00126 LACP:DUT allow to create more than 8 dynamic trunk. Comment: LACP allows 5 port. Static Trunk allows 8 ports. 2. ES4324AL-FLF-17-00122 LACP:DUT only allow 5 port to enable LACP. Comment: Design as specification. 3. ES4324AL-FLF-17-00120 IPConfiguration:There is no other way to know the DUT ip address from web after get IP address from DHCP server. Comment: It is an enhanced feature. We could develop it after time resource available and approval. 4. ES4324AL-FLF-17-00116 IPconfiguration: The banner logo will change to "Edgecore" when change IP address. Comment: We don't have any Edgecore logo. Unverified EPRS: 1. ES4324AL-FLF-17-00123 PortSecurity:DUT can not send trap when the mac amount is filter by port security. 2. ES4324AL-FLF-17-00128 LACP:DUT cano not create dynamic trunk when connect links is auto-nego and 100F. 3. ES4324AL-FLF-17-00127 LACP:DUT will lost connection when disconnect dynamic trunk link quickly. 4. ES4324AL-FLF-17-00114 IGMPSnooping:The description of IGMP page is wrong. Commnet: Only synchronize all keyword "IGMP Snooping" to "IGMP SNOOP" ***************************************************************************** Version: 2.5.0.9 Date : 2008/11/23 Purpose: Maintainace release Fixed bugs: 1. Fix power comsumption unchanged while user change power saving mode. 2. Fix link up failure during power saving mode enabled. ***************************************************************************** Version: 2.5.0.8 Date : 2008/10/22 Purpose: Maintainace release Fixed bugs: 1. Fix Power saving initialize failure. 2. Fix Veriphy web page incorrect issue. ***************************************************************************** Version: 2.5.0.7 Date : 2008/10/15 Purpose: Maintainace release Change features: 1. Modify and change power saving mode enabled. Fixed bugs: 1. Fix incorrect words on web pages. ***************************************************************************** Version: 2.5.0.6 Date : 2008/07/10 Purpose: Maintainace release Fixed bugs: 1. A new issue about ingress filter check box. ***************************************************************************** Version: 2.5.0.5 Date : 2008/07/04 Purpose: Maintainace release Change features: 1. Change 8024L2 8024L and 8024S RSTP default setting "enabled". 2. Add Power Saving Mode ***************************************************************************** Version: 2.5.0.4 Date : 2008/06/26 Purpose: Maintainace release ***************************************************************************** Version: 2.5.0.3 Date : 2008/06/25 Purpose: Maintainace release Change features: 1. Change 8024L2 RSTP default setting "enabled". ***************************************************************************** Version: 2.5.0.3 Date : 2008/05/14 Purpose: Maintainace release Change features: 1. Change ACL to 'Management Access Filter' on 8024S serial. ***************************************************************************** Version: 2.5.0.2 Date : 2008/05/09 Purpose: Maintainace release Change features: 1. Change ACL to 'Management Access Filter' on 8024L2/L serial. 2. Update RSTP to lastest version. ***************************************************************************** Version: 2.5.0.1 Date : 2008/01/31 Change features: Fixed bugs: 1. SMCGS24C-Smart rewrite S/N after configuration upload. EPD Issue# 16525 ***************************************************************************** Version: 2.5 Date : 2007/09/27 Change features: 1. Per Accton request, change runtime firmware version number to 4 digitals Fixed bugs: 1. ES4324AL-FLF-17-00100: The backup config cannot display VLAN menbership setting correctly 2. ES4324AL-17-00040: SMCGS24C-Smart blocks STP traffic. 3. ES4324AL-FLF-17-00101: The TX/RX error packets shown in CLI and Web are not matched. 4. ES4324AL-FLF-17-00102: Fixed SNMP does not display correct counter issue, reported by Copper ***************************************************************************** Version: 2.4 Date : 2007/04/18 Change features: 1. Per Accton request, disable DHCP mode by factory default. Fixed bugs: 1. RSTP web page timer issue. 2. Cable diagnostics pair swapping issue, reverse the result for pair A&B and pair C&D to fit SMC's HW. 3. SFP does not link up with SMC's specific SFP module when power up. 4. VLAN ID 4094 can not be configured issue. 5. SIP =0 filter issue. TCP/UDP packets with source/dest port equals to zero will be forwarded correctly/transparently. ***************************************************************************** Version: 2.3 Date : 2006/11/28 New features: none. Change features: none. Fixed bugs: 1. ES4324AL-FLF-17-00021: 1QVLAN:port can't transmit tagged packets correctly. ES4324AL-17-00012 1QVLAN: the frame which sent from access mode port is tagged. ES4324AL-17-00025 1Qvlan:Packets which receive from untagged Port are tagged. ES4324AL-FLF-17-00031: 1Qvlan:Packets which receive from untagged Port are tagged. ES4524AL-FLF-17-00032 VLAN:DUT can't handle ping packets with tag Already fixed in version 0.0.2.2 release. 2. ES4324AL-17-00036 Realworld:RSTP is not work and Ping DUT will lose some packets. Accton can't be sure to reproduce it every times in the lab. not a bug. 3. ES4324AL-FLF-17-00002: IGMPsnooping:When disable Unregistered IPMC Flooding, the mrouter port can't receive the multicast packets . Not a bug. (WAD) 4. ES4324AL-17-00037: RSTP: DUT don't obey "(HelloTime+1)*2¡ØMaxAge¡Ø(ForwardingDelay-1)*2" Bug. Fixed in this (0.0.2.3) release. 5. ES4324AL-17-00038 1Qvlan: In WEB menu "Status"-"Overview"-"vlan information", it just can display 8 vlans. ES4324AL-FLF-17-00039: 1Qvlan: In WEB menu "Status"-"Overview"-"vlan information", it just can display 8 vlans. Not a bug. (WAD) 6. ES4324AL-FLF-17-00019: L2SWPer:The DUT don't support the Jumbo Frame. Already fixed in version 0.0.2.2 release. 7. ES4324AL-FLF-17-00029: 1QVLAN:we can set Port's PVID as a inexistence Vlan ID. It is Ok in 2.2 release. When we set Port's PVID by using inexistence VLAN ID the PVID will be 1. Not a bug. 8. Cable Diagnostics issue in 16 port. Fixed in this (0.0.2.3) release. 9. ES4324AL-FLF-17-00033: ConfigurationFile:when upload a error config file, DUT will show "Can't find Page". Fixed in this (0.0.2.3) release. 10. ES4324AL-FLF-17-00040: 1QVLAN:In WEB Help, DUT displays "the range of vlan id is 1~4094". Fixed in this (0.0.2.3) release. 11. ES4524AL-FLF-17-00018 SNMP: MIB can not work correctly. It is Ok in 2.2 release. Not a bug. 12. ES4524AL-FLF-17-00033 RSTP:When enable trunk and rstp,DUT can't transmit normal port status. ES4524AL-FLF-17-00034 Realworld:RSTP is not work and Ping DUT will lose some packets. Not a bug. (WAD) 13. Fix for no dhcp changes on link up state and problem with DHCPRELEASE not being transmitted, and now also transmitted with previous DHCP IP Address. 14. Fixed IPMC mac entry delete issue in 7389/90/91 revC chip. ***************************************************************************** Version: 2.2 Date : 2006/10/20 New features: none. Change features: none. Fixed bugs: 1. Port bandwidth (rate limit) can not be saved in SMC8016. 2. A minor bug in port mirroring function. 3. LACP + RSTP Hang/Reboot issue. 4. Trunk group can not be configured in VLAN port config web page issue in SMC8016. 5. Thin PC can't get Boot file name. 6. Port rate limiting will overlay the rate limiting configs of trunk issue. 7. LACP and static trunk should be exclusive. 8. Non-vlan port automatically assigned to management vlan 1. ***************************************************************************** Version: 2.1 Date : 2006/9/28 New features: none. Change features: none. Fixed bugs: 1. Change the H/W version string size back to the same size with release 1.9. ***************************************************************************** Version: 2.0 Date : 2006/9/27 New features: 1. Added SMC8016 16 port platform support. Change features: none. Fixed bugs: 1. ES4324AL-17-00031 : System : when enable RSTP in four DUTs,the Web Manager will show "Duplicated PC is controlling the device now ES4324AL-17-00032 : System : when enable RSTP in four DUTs,the Web Manager will show "Duplicated PC is controlling the device now ES4324AL-17-00033 : System : when enable RSTP in four DUTs,the Web Manager will show "Duplicated PC is controlling the device now ES4324AL-17-00034 : System : when enable RSTP in four DUTs,the Web Manager will show "Duplicated PC is controlling the device now 2. ES4324AL-17-00029 : System : DUT1 can creat max 255 vlan but only learn 20 mac-address. ES4324AL-17-00035 : System : DUT1 can creat max 255 vlan but only learn 20 mac-address. 3. ES4324AL-17-00027 : System : Reset DUT and restore default setting, DUT hang. ES4324AL-17-00028 : System : Reset DUT and restore default setting, DUT hang. ***************************************************************************** Version: 1.9 Date : 2006/7/7 New features: none. Change features: none. Fixed bugs: 1. ES4324AL-17-00014 : RSTP: when change Root Bridge's priority, it can't become Designated Bridge. Fixed in this release. 2. ES4324AL-17-00019 : SNMP:MIB can not work correctly, We can't set value for read-write variable by private community. No this issue here. Can't reproduce it. 3. ES4324AL-FLF-17-00008 : L2SW:Bidictional traffic loading exists packets loss. As what can be expected. 4. ES4324AL-17-00022 : System:After configured LACP and RSTP and connected two DUTs, the DUTs would auto-reboot and be hang. ES4524AL-FLF-17-00022 Limit the trunk members from 8 to 5 members. 5. ES4324AL-17-00017 : L2Per:The throughput test exists packets loss,the pass rate of 9216(jumbo frame) is 64.37%. ES4324AL-17-00018 As what can be expected. 6. ES4324AL-17-00012 : 1QVLAN: the frame which sent from access mode port is tagged In the access mode the switch behavior is forwarding the packets as untaged packets. It means that the switch doing packet forwarding without doing any change in the packets. If the packet is tagged in the ingress, it will still be tagged in the egress. It is waht can be expected. 7. ES4324AL-17-00015 : RSTP: when port's Port Role is "Alternated" or "Backup", its Port State is "Blocked", but it should be "Discarding" As what can be expected. The following web link is the RSTP test plan from IXIA. http://www.ixiacom.com/library/test_plans/display?skey=stp-rstp#3. 8. ES4324AL-17-00006 : after connect a short cable with the DUT,when I press "apply" button frequently, the cable status display wrong. ES4324AL-FLF-17-00020 Fixed in this release. ES4324AL-FLF-17-00028 ES4524AL-FLF-17-00020 ES4524AL-FLF-17-00007 9. ES4324AL-17-00013 : RSTP:when set invaild value from WEB, you must click another page before you wanna correct in this page. We have "refresh" button. 10. ES4324AL-17-00016 : PortSecurity:when I enable Port Security function in any port,the port can not learn new MAC address. As what can be expected. 11. ES4324AL-17-00020 : 802.1x:The DUT can't sent radius access request to the radius server. Fixed. Should be same as ES4324AL-17-00005 which is fixed. 12. ES4324AL-17-00011 : when unplug the Ethereal cable, DUT will send "DHCP request" and Manual ip will be down. Suould be closed. 13. ES4324AL-17-00023 : System:After connected DUTs and only configure the RSTP, the RSTP status WEB page of DUT1 can't be opened. Needs more time to be fixed and sugget limitation in LACP members pr. ES4524AL-FLF-17-00023 Limit the trunk members from 8 to 5 members. 14. ES4324AL-17-00024 : System:After connected DUTs and configure the DUTs as diagram showed, the RSTP status WEB page of all DUTs can't be opened. Needs more time to be fixed and sugget limitation in LACP members pr. ES4524AL-FLF-17-00024 Limit the trunk members from 8 to 5 members. 15. ES4324AL-FLF-17-00009 : IPConfiguration: we must restart the DUT to take the DHCP effect. As what can be expected. No fix. Should be closed. 16. ES4324AL-FLF-17-00024 : PortTrunk:If enable forced mode with 100M/F capability for both ends of trunk connection,the trunk link down. Fixed in this release. 17. ES4324AL-FLF-17-00017 : 1QVLAN: can add vlan with invalid vid. Fixed in new release. 18. ES4324AL-FLF-17-00025 : L2SW:During the testing of traffic load over minimum IFG with Bi-directional(port-pair),there are some packet lost (15/100000). Caused by Excessive collisions. According to Standard. Should be Closed. 19. ES4324AL-FLF-17-00026 : L2SW:set the duplex to the half mode,the traffic load for mix speed/duplex with line speed will cause some packets to be lost. Caused by Excessive collisions. According to Standard. Should be Closed. 20.ES4324AL-FLF-17-00027 : IGMPSnooping:Only 13-15 groups can be left after I sent IGMP leave reports to leave 32 groups. "Made fix in new release. We already add the queue buffer from 8 to 16 in our code. ES4524AL-FLF-17-00019 Due to RAM size limitations. No fix. Should be closed. WAD issues: 1.ES4324AL-17-00021 ES4524AL-FLF-17-00021 : L2Traffic:After configure RSTP and VLAN on all DUTs, the low rate L2traffic flooding will occur. We can not reproduce the issue here. We do not have enough devices. ***************************************************************************** Version: 1.8 Date : 2006/5/5 New features: none. Change features: none. Fixed bugs: 1. ES4524AL-FLF-17-00002 : IGMPsnooping:the DUT can't handle well version 2 membership leave packet. 2. ES4524AL-FLF-17-00003 : IGMPSnooping:DUT can't handle the igmp leave reports well to remove the registered muliticast from leaving igmp member port. 3. ES4524AL-FLF-17-00005 : IGMPsnooping:The timeout of Host is only about 70 seconds, it's too short. 4. ES4524AL-FLF-17-00007 : after connect a short cable with the DUT,when I press "apply" button frequently,the cable status display wrong. 5. ES4524AL-FLF-17-00013 : WEB:The second help INDEX menu can't connect and display correct web page, it will show failed. 6. ES4524AL-FLF-17-00011 : 1Q VLAN :VLAN can be removed when it have untagged port members which has the same PVID as this VLAN. 7. ES4524AL-FLF-17-00014 : RSTP:can't know the status of port role. 8. ES4524AL-FLF-17-00015 : NetworkNotice: can't recive "Authentication failure" trap. -- It is disabled by default. Please go to snmp page to enable it. 9. ES4524AL-FLF-17-00017 : NetworkNotice: can't disable SNMP in web management. 10.ES4524AL-FLF-17-00018 : SNMP: MIB can not work correctly WAD issues: 1. ES4524AL-FLF-17-00001 : PortMirror:When enable port mirror, sending bi-unicast traffic will occur packets loss. 2. ES4524AL-FLF-17-00004 : L2SWPer:Throughput exists packets lost ,the pass rate is 64.37% for the jumbo frame of 9216. 3. ES4524AL-FLF-17-00006 : 802.1x:The DUT can't sent radius access request to the radius server. (not a bug) 4. ES4524AL-FLF-17-00008 : PortSecurity:when I enable Port Security function in any port,the port can not learn new MAC address. 5. ES4524AL-FLF-17-00009 : SNTP:The SNTP can't be configured, this feature can't work. (not supported) 6. ES4524AL-FLF-17-00012 : NetworkMonitor:can't show historyControlTable in EliteView RMON Manager.(not supported) 7. ES4524AL-FLF-17-00016 : 1QVLAN: can't join any port to special vlan as tagged set.(not supported) ***************************************************************************** Version: 1.7 Date : 2006/4/27 New features: none. Change features: none. Fixed bugs: 1. ES4524AL-FLF-17-00010 - 1QVLAN:can¡¦t manage DUT after join all ports in special vlan Known issues: None. ***************************************************************************** Version: 1.6 Date : 2006/4/13 New features: none. Change features: none. Fixed bugs: 1. When boots up the system, the local console didn't request user to input the password. It will login the system immediately by type the "Enter" key. Known issues: None. ***************************************************************************** Version: 1.5 Date : 2006/4/12 New features: none. Change features: none. Fixed bugs: 1. ES4324AL-FLF-17-00012:1QVLAN: can't manage DUT after join all ports to special vlan. This is not a bug. The reason is the pvid of all ports is set to vlan2 in the test but the management vlan is vlan1. The switch can still be managed using tagged packet with vid 1. It is reasonable for users to want to manage switch using tagged packet only. However, we add some check to prevent management vlan from being deleted or without any member. It ensures the switch is always managed by web interface. 2. ES4324AL-FLF-17-00019: L2SWPer:The DUT don't support the Jumbo Frame. 3. ES4324AL-FLF-17-00021: 1QVLAN:port can't transmit tagged packets correctly 4. ES4324AL-FLF-17-00022: PortTrunk:after 5-10 minites of create 8 ports trunk,DUT will flood the DHCP packets Known issues: None. ***************************************************************************** Version: 1.4 Date : 2006/3/24 New features: none. Change features: 1. Remove SFP patch code. Fixed bugs: 1. Fix the link status showing "QOS" when combo port link up on fiber mode. Known issues: None. ***************************************************************************** Version: 1.3 Date : 2006/3/15 New features: 1. Allow users to choose booting from Image0 or Image1. Change features: 1. Monitor link speed/duplex to see if the link status is changed from up->down->up within a software polling interval. This is for manufacture test that change the speed/duplex of all ports at the same time. Fixed bugs: 1. In some condition, the loop occurs even RSTP is enabled. Known issues: None. ***************************************************************************** Version: 1.2 Date : 2006/2/17 New features: None. Change features: 1. Change mirror function from mirroring igress only to both ingress and egress. On-going features: None. Fixed bugs: None. Known issues: None. ***************************************************************************** Version: 1.1 Date : 2006/2/10 New features: None. Change features: 1. DHCP client is enabled by default. 2. Using 'X' instead of 'v' to mark a port in Static MAC configuration. 3. Change some wording in the title and sub-title. On-going features: 1. None Fixed bugs: 1. Help text. Known issues: None. ***************************************************************************** Version: 1.0 Date : 2006/1/25 New features: None. Change features: 1. Change the static web page to improve the performance. On-going features: 1. Help text. Fixed bugs: 1. SFP link issue with Dell tester. 2. ES4324AL-17-003: It takes a long time to add one trunk. 3. ES4324AL-17-005: 4. ES4324AL-17-006: Static MAC address issue. ES4324AL-17-007: Static MAC address issue. 5. ES4324AL-17-009: The switch sends duplicated broadcast/multicast packets through Trunk Group. 6. ES4324AL-17-012: The swich can not send out IGMP Query packets. 7. ES4324AL-17-013: Once the port passed the 1X authentication, it will not do re-authentication when port state is changed(link down/up). The port is always opened. 8.ES4324AL-17-014: Packet loss in AST-II. After disabling the the default jumbo-setting the NTC test-results are according to Vtss own results. Known issues: None. ***************************************************************************** Version: 0.7 Date : 2006/1/16 New features: 1.Port Security Change features: 1.Port Security a.Port security now only handles dynamically learned MAC addresses. b.The port security web & cli have changed. The user can now specify from 0-8 addresses per port as well as 'no limit'. Also, the display of the number of learned MAC addresses have changed to the string '-' if a port is in "No Limit" mode. 2. Change SysName to SMC8204. 3. Change SysObjectId to 1.3.6.1.4.1.202.20.59. 4. Show the serial number immediately once the switch boots up. Missing features: 1. Help text Fixed bugs: 1. ES4324AL-17-001: Firmware upgarde form http. 2. ES4324AL-17-002: Not a bug. It has closed by NTC already. 3. ES4324AL-17-004: Not a bug. It has closed by NTC already. 4. ES4324AL-17-008: The start trap using IP address 0.0.0.0 5. ES4324AL-17-010: The storm control is not working. 6. ES4324AL-17-011: The WRR ratio is not correct. Known issues: 1. SFP link issue with Dell tester. 2. ES4324AL-17-003: Not a functinal bug but need to add some message to prompt user to wait some time. We will add it in the next version. 3. ES4324AL-17-005: Not a functinal bug but need to add some message to prompt user to wait some time. We will add it in the next version. 4. ES4324AL-17-006: ES4324AL-17-007: These 2 bugs are releated to the Static MAC address web page. We also found there is performance isuue in this page so we want to improve it by change the web page. However, it is very complicated. We will fix it in the next version. 5. ES4324AL-17-009: NTC said it's hard to reproduce and we also can not reproduce. 6. ES4324AL-17-012: The swich can not send out IGMP Query packets. VTSS comment: Performed the same setup as specified in the Excel sheet on our reference software version 2.26a. After the default no-router-present interval (255 seconds), I saw that the switch began emitting IGMP Queries with a period of 125 seconds. The switch waits for this period before it will transmit its own queries. This way any existing router in the network will continue to "be in charge" of IGMP quering. 7. ES4324AL-17-012: Once the port passed the 1X authentication, it will not do re-authentication when port state is changed(link down/up). The port is always opened. VTSS comment: Fix in the next version. 8.ES4324AL-17-013: Packet loss in AST-II. VTSS comment: Check if the frequecy of the oscillator is 25.00625. ***************************************************************************** Version: 0.6 Date : 2006/1/9 Note: Please enter "/system restore default" command first after upgarding firmware. New features: 1.Port Security Change features: 1. Allow 802.1x packet to pass through the switch when 802.1x is disabled. 2. Increase the number of configured static MAC address to 24. 3. Change the number of configured VLAN entry from 256 to 255. Missing features: 1. Help text Fixed bugs: 1. Reduce bootup time to about 25 secconds. Known issues: 1. SFP link issue with Dell tester. ***************************************************************************** Version: 0.5a Date : 2006/1/4 Note: Please upgrade new boot code. New features: 1. Release the new boot code. 2. Upgarde firmeware from HTTP 3. Config hardware version(R01) and serial number(0001) to eeprom if a brand-new eeprom is detected. Change features: 1. disable the blink of the speed LEDs Missing features: 1. Port security 2. Help text Fixed bugs: Known issues: 1. Bootup time is long 2. Allow 802.1x packet to pass through the switch when 802.1x is disabled 3. SFP link issue with Dell tester. ***************************************************************************** Version: 0.5 Date : 2005/12/29 Note: Please enter "/system restore default" command first after upgarding firmware. New features: Output Queue. Jumbo-Frame support. Multicast StormControl/DLF unicast. Static MAC address Q-in-Q Add a bootup finish information in the console information Add a show S/N information in the console Add the password protection to the CLI(It is empty string in default, can be changed by /console password command) Change features: Increase the number of configuratble valn to 256 Missing features: Port security Fixed bugs: Known issues: Bootup time is long Version: 0.4 Date : 2005/12/26 Note: Because the eerprom contents are changed for adding Configuration up/download feature, please enter "/system restore default" command first after upgarding firmware. New features: Management ACL. Configuration up/download. Dynamic statistics configuration. Show HW/SW version and default IP address in console when booting up. Change features: Change SFP mimic symbol. Missing features: Output Queue. Jumbo-Frame support. Multicast StormControl/DLF unicast. Fixed bugs: The first SFP does not work. Known issues: Version: 0.3 Date : 2005/12/16 New features: Add SFP to mimic panel. Cable diagnostic web. Change features: Change shaper/policer web. Change DSCP web. Fixed bugs: The LED of port 21-24 does not work when inserting SFP module. Known issues: The first SFP does not work. Version: 0.2 Date : 2005/12/9 New features: RSTP web LACP web 802.1x web IGMP snooping web Source IP filter web SNMP web Fixed bugs: Change baud rate to 9600 to fix cosole problem. Known issues: The first SFP does not work.